igubal® pillow block bearing, mm/inch
Dimensional series K in mm and inch dimensions
Maintenance-free, dry operation
High strength under impact loads
Compensation of misalignment errors
Compensation of edge loads
Suitable for rotating, oscillating and linear movements
High radial loads
Easy to fit
Predictable service life
Maintenance and lubrication-free
igubal® pillow block bearings ideally compensate for shaft misalignments, tilts and bends through their spherical adjustability. Main application areas are wherein such effects should not hinder special designs.
Maintenance-free igubal® pillow block bearings have a tolerance in the inner diameter, according to E10. The shaft should have a tolerance between h6 and h9. The bearing clearance compensates for bearing expansions during heating.
igubal® pillow block bearings are designed to be fastened with 2 screws. A precise alignment of the bearing housing is not required as the spherical bearing automatically compensates for error.
igubal® pillow block bearings are available in the dimensional series K and E for shaft diameters from 5 to 50 mm. The dimensional series K is also available in inch dimensions. Please ask us for other dimensions.
When chemical resistance is required
When a low-cost alternative is desired
When dirt-resistant bearings are needed
When misalignments should be compensated
When fully split components are needed
When temperatures above +80°C prevail
When an integrated collar is required
When dimensions over 50 mm are needed
When rotation speeds in excess of 0,5 m/s should be implemented