Weighing and inspection technology

From filling packaging units to positioning cameras and sensors

In addition to high-precision weighing, modern multihead weighers are also capable of dosing and counting. Cameras and sensors are then used to check the packaging quality. Both areas require lubrication and maintenance-free linear and rotary bearing technology that enables long service lives and fulfils the high FDA requirements.

To the individual stations and materials used

Weighing technology

Inspection technology

Weighing technology

At the heart of multihead weighers are the load cells with their high-precision measured values. In addition to weighing, modern systems are also capable of dosing and counting. Requirements for the bearing technology used for this include high precision, freedom from lubricants, corrosion resistance and resistance to cleaning agents.

Products used and application examples
The example of a multipond multi-head weighing system from Atoma GmbH shows two areas of application in which igus® bearing products are used. Above all, igubal®-pillow block bearing, igldiur plain bearings and drylin®-linear bearings were installed here:

**Discharge mechanism flap bearing

filling / dosing**

With 36 heads, the multipond multi-head weighing systems from Atoma achieve more than 500 weighings per minute.

Go to complete user report

Discharge mechanism flap bearing

iglidur

® bearings are used in the discharge mechanism of the containers. A single iglidur ® material is used universally for all weighing systems, which covers a broad temperature spectrum, is electrically conductive and meets the high hygienic standards.

filling / dosing

Inspection technology

In inspection technology, products undergo various testing processes that require the use of cameras and sensors. Suitable linear bearing technology must be found so that these can be moved precisely and safely. Lubrication-free and FDA-compliant bearings are required for food packaging in particular. In addition, the focus is on robust systems with a long service life.

Products used and application examples
The TQS-SP TE system from Wipotec for inspecting and packaging products in folding cartons demonstrates the various requirements for warehouse products within inspection technology. In addition to format adjustments, the drylin® spindle linear tables used here were also used for the precise positioning of camera and sensor technology.

**1. side and format adjustment

2. transfer roller

3. side and height adjustment

4. pressure roller

5. positioning of the sensors

6. guide rollers**

More about this application

1. lateral and format adjustment

drylin® SHT linear tables with spindle drive enable precise side and format adjustment by hand.

2. transfer roller

A highly wear-resistant round bar made of iglidur® JB is used as a transfer roller in the system. It also offers a low coefficient of friction and works without lubrication.

3. lateral and height adjustment

The drylin® spindle used is robust and enables adjustment even under high loads and long stroke lengths.

4. pressure roller

Several pressure rollers are used for product transport, which keep the products safely on track and enable the short processing cycles. In the rollers, completely lubrication- and maintenance-free bearings made of iglidur® J also prove themselves in continuous operation.

5. positioning of the sensors

In addition to the format adjustments of the test and packaging unit, drylin® SHT spindle linear tables are also used for the fine adjustment of the sensor system. Thanks to their precision and robustness, they guarantee convenient operation with maximum availability.

6. guide rollers

Finally, xiros ball bearings are also used in the guide rollers in the Wipotec module. Like all components, they are also fully FDA-compliant.

Customer application examples

Format adjustment in Krones inspection systems

Inspection technology machines from Krones rely on our plain bearings, slewing ring bearings, e-chain®, gearbox solutions and linear axis for format adjustment.

Go to user report

Pneumatic flap control

In this weighing and filling system for foodstuffs, the clevis joints are pneumatically controlled and thus actuate the flap system.

Testing and sorting system

Using a vacuum gripper in this testing and sorting system, test parts are removed, measured and fed to various magazines.

Filling and capping machine

In addition to the high chemical resistance, the iglidur® J bearings offer maintenance-free dry operation in this application.

And even more...

Discover even more successful applications in the beverage, food and packaging industries.

Discover more applications

Consulting

I look forward to answering your questions

OEM Finland OY+358 207499499 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 17 pm.
Saturdays from 8 am- 12 pm.

Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr