My contact person
OEM Finland OY

Fiskarsinkatu 3

20750 Turku

+358 207499499
+358 207499456

drylin® tandem toothed belt axis


Toothed belt axis ZLWT with two parallel toothed belts for two linear carriages

Thanks to the double belt, the ZLWT tandem toothed belt axis is ideal if several linear carriages need to be moved quickly and independently of each other. The motors can be mounted on one side or on both sides. A parallel synchronous drive is also possible.
 

  • Addition to the tandem toothed belt axis installation size 10/20
  • Compact tandem toothed belt axis with two toothed belts in one unit
  • Two carriages can be controlled synchronously or separately
  • With drylin W exchange bearings for fast bearing exchange on the rail
  • Can be supplied ready-to-connect with igus  electric motors and drylin D1 dryve motor control system
Typical application areas: automation, robotics, assembly cells, painting systems

Technical data and dimensions [mm]

Part No.max.
stroke length
 
[mm]
Transmission
 

[mm/rev]
Tooth profile
 
Toothed belt material
 
Toothed belt tension
[N]

 
[kg]
Weight
(per 100mm)
[kg]
  
ZLWT-101602000753MNeoprene with fibre glass2004.00.25 Request
ZLWT-102002000753MNeoprene with fibre glass2004.50.30 Request
ZLWT-2020030001448MPU with stainless steel75011.00.50 Request
ZLWT-2030030001448MPU with stainless steel75012.50.65 Request
 
Part No.AAIHE2E3E4C4flthalzld2
 
H7
 
ZLWT-10160193150/200/25040180Al-139024017418.01844810
ZLWT-10200233150/200/25040220Al-1312024017418.01844810
ZLWT-20200252200/250/300/35063234Al-1812024019828.52759614
ZLWT-20300352200/250/300/35063334Al-1820024019828.52759614
 
Part No.d3g3DK
 
for DIN912-M6
atlt2luV [mm/rev]
 
Standard
 
ZLWT-1016038M410M6107592075
ZLWT-1020038M410M6107592075
ZLWT-2020060M520M81227840144
ZLWT-2030060M520M81227840144

Tech up with igus toothed belt axis

Tech up

  • Toothed belt axis with double toothed belt based on linear guide system drylin® W
  • Separate control of two linear carriages or synchronised operation
  • Prepared for the connection of two NEMA stepper motors/DC motors
  • Suitable as 7th axis in robotics for moving two robots

Cost down with igus toothed belt axis

Cost down

  • Use of one linear axis instead of two
  • Wide design offers full stability
  • Reduced construction effort due to delivery of linear axis/motor/motor control system from a single source
  • All liners can be replaced directly on the rail without disassembly
  • Cost-effective replacement kit consisting of liners, lids and assembly tool

igus products have been tested

Proof

  • Service life of drylin® W can be calculated online
  • Put through long-term test in the igus lab
  • Bearing change directly on the rail in under 30 seconds
  • Motor control system can be simulated online

igus products are sustainable

Sustainability

  • Positioning of two linear carriages with only one axis
  • Lubrication-free, clean and maintenance-free
  • Liner can be replaced, all metal components of the linear axis can be re-used for life


Delivery times

Delivery time

5-8 days


The drylin® ZLWT linear axes have been tried and tested

The robust construction with lubrication-free drylin® W linear plain bearings ensures a long service life and maintenance-free operation. This was confirmed in the igus test lab.
 
ZLWT - tested and proven:  400,000 cycles with no maintenance

  • Motor: igus EC direct-current motor and gearbox
  • Load:  1,500N
  • Stroke:  1,500mm
  • Speed:  0.3m/s
  • Customer specification:  400,000 cycles
  • Test end:  412,654 cycles
  • Target reached:  YES


NEMA stepper motors and DC motors

Electric drive systems

Suitable NEMA stepper motors and DC motors

Whether DC or NEMA stepper motors: with its wide-ranging motor shop, igus offers the possibility of equipping linear axis systems with the appropriate motor solutions. Complete positioning systems can be configured in combination with drylin linear axes, which can be ordered completely ready for installation and connection. With the powerful motors you solve a wide variety of problems in the electric drive technology. For controlling motors, igus offers the high-performance D1 dryve and D3 dryve motor control systems.
 

 

Electric motors drylin® E

Liners replaced in 30 seconds

Quick change – smart and time-saving

With the innovative WJ200UMA-01-AL pillow block from the drylin® W product range, it is possible to replace the plain bearing liner even more easily without complicated disassembly work being required.
The tool supplied makes it possible to exchange the plain bearing liner within seconds. This saves valuable time and costs!

To WJ200UMA pillow block
Change plain bearing materials for linear axes from igus

Contact our expert now

Our team will get in touch with you by phone. Simply ask for an appointment and our specialists will be happy to advise you in detail.

Go to the contact form
Download all drylin news

Learn more about other igus® innovations and request our comprehensive news 2020 magazine.
 

Go to the PDF downloads
ZLW configurator

By using the Designer for Drive Technology, you can now configure your drive system with toothed belt drive online in just a few steps.

drylin® productfinder