The small drylin® N low-profile guide system consists of a rail and a guide carriage. The sliding elements are manufactured from a high-performance plastic. The low-profile linear guide was developed especially for applications with very little installation space. The low-profile linear guides move completely without any lubricant and guarantee compliance with the highest hygiene standards.
Thanks to space-saving design with an installation height of 9-12 mm
Thanks to a lightweight, energy-efficient design of the low-profile guide system
Thanks to specified displacement forces (carriage with pre-load prism slide)
Spring preload of the carriage and sliding element ensures quiet running
Thanks to overmoulded carriage (permanent connection between carriage and sliding element)
Thanks to the use of double carriage, it is possible to dispense with several carriage
drylin® N low-profile guide systems are deployed particularly in places where the installation spaces are small while demands are high. The compact but tough design meets the highest demands with regard to precision and flexibility. The various widths for the guides and the wide range of guide carriages provide a great variety of application options.
The LOV3 delta 3D printer from PEL3O has been designed for both commercial and private use. The goal here was to address the creative mind. The 3D printer from PEL3O operates quickly and reliably with drylin® N, without the need for maintenance.
Two conventional cameras are set up at an angle on a low-profile guide system to create a three-dimensional image. This trick renders an expensive 3D camera unnecessary. For this to work properly, the slight difference in the alignment of the cameras must remain identical at all times. This is made possible by a drylin® N low-profile guide system.
In this packaging machine, a gripper lifts and packages bottles. The fingers of the gripper are moved by means of a low-profile guide system. No soiling by lubricants such as oils or greases may occur at this critical point in the machine. For this reason, only one solution came into question – drylin® N.
By means of a vacuum gripper test parts are removed, measured and taken to various magazines. The removal unit is moved along the X-Y axis using the space-saving and cost-saving drylin® N low-profile guide system. The robust TK-04 guide system takes on vertical guidance.
The miniature linear rails from the drylin® T product range are an alternative to the low-profile guide systems if you need to work with higher fill weights (in excess of 50 kg) or with greater precision (under 50 µ).
Monday to Friday from 7 am - 8 pm.Saturdays from 8 am- 12 pm.