triflex energy chains in autonomous repair cell at SEAT

triflex energy chain for maximum freedom of movement with simultaneous cable protection

The Spanish company Procon Systems specialises in automated systems for production lines, especially in automotive production. Procon Systems has developed an automatic repair cell for the SEAT paint shop. This recognises and repairs defects in the paintwork of the car bodies independently. The entire process is autonomous.

Profile

What was needed: triflex energy chains, linear retraction system, swivel bracket
Requirements: The energy supply must be flexible and still protect the cable from sagging
Industry: Automotive sector
Success for the customer: Long service life, as the cable package is not under tension

Discover all of our products for automotive production

Products used

Problem

The autonomous repair cell installed by Procon Systems at the SEAT plant works in three steps: firstly, the car body is guided through a measuring tunnel. In the next step, it is transferred to the repair cell, where it is inspected for damage. In the third step, the affected areas are wet-sanded and the defects repaired. After that, sanding residues are removed and the paintwork is polished. Robots carry out all these work steps.

The biggest challenge for the engineers was to ensure that damage to all areas of the bodywork was recognised and repaired.

A cable package suspended from pulleys was out of the question as such a system would be under great tension and lead to cable breaks.

Solution

The decision was made in favour of the igus triflex system. The triflex energy chain offers greater flexibility and manoeuvrability compared to conventional corrugated tube systems. At the same time, the bend radius is limited so that the cables cannot be bent excessively. The triflex energy chain also allows a certain amount of torsion.

The RSEL system was chosen for the energy supply on the robot as it offers the best price-performance ratio. It is more cost-effective than the RSE and slimmer than the RS system. In addition, various media had to be safely guided on the robot, such as hoses for polishing agents, compressed air as well as control and data cables for the functions of axis 6 with the camera.

The cost-effective TRL (light 3D chain) was selected for the less stressed axes 1 to 3. It is light, inexpensive and easy to fill.

For axes 3 to 6, the stronger TRE.100.145.0 was chosen to provide sufficient space for the cables and hoses. The filling can be easily optimised using the two openings on the side of the energy chain.

With its maximum rotation angle of 270° the swivel bracket ensures the necessary freedom of movement for the robot, presenting the ideal cost-effective solution for this application.