Installation instructions twisterchain® new guide trough

Check order for completeness. Screw the individual parts together according to the instructions...

... then assemble the complete guide trough with upper and lower run

A = Distance
B = Radius of T-profile
The T-profile should have the same distance to the centre of rotation at 3 points.

Align the trough to the pivot point and then screw it in place

Alignment using defined angle and hole grids for easy height adjustment

twisterchain® Installation in the trough -e-chain® Screw onto the fixed end in the trough

Attachment of the e-chain® to the customer moving arm by screwing (moving arm on the customer side)