iglidur® F2, sleeve bearing, mm - F2SM

iglidur® F2 | ESD-suitable, wear-resistant and dissipative
iglidur® F2 helps to avoid electrostatic charging. Good media and temperature resistance, suitable even in wet conditions due to low moisture absorption and good universal wear values in a wide range of applications.

Typical application areas

Mechanical engineering
Robotics industry

Here you will find further possible applications:
Industry solutions

 

When to use it? When the bearing should be electrically discharging When a universal bearing is required

When not to use it? When an universal bearing without static dissipation capability is required iglidur® G, sleeve bearing, mm iglidur® P, sleeve bearing, mm For underwater use iglidur® H370, sleeve bearing, mm When maximum wear resistance is required iglidur® J, sleeve bearing, mm iglidur® W300, sleeve bearing, mm

Use our filter options to find the suitable product 

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining