Product information
- Payload
up to 5.0kg
- Workspace
1000 x 400mm
- Degrees of freedom:
2
- Speed:
up to 0.5m/s
- Repeatability
± 0.5mm
Optionally available
Product information
Optionally available
Line robot
For a wide range of tasks, igus offers linear robots as surface, line and room linear robots. igus linear robots contain pre-configured drylin linear modules and linear axes with igus stepper motors as well as all components required for self-assembly.
Application examples
Typical applications of our drylin® line robots are pick & place, conveyor belt picking, and stacking tasks. They mostly provide the platform on which our customers build their application. For example, a gripper can be mounted very easily to enable sorting tasks. Our linear robots move in different industries such as the electronics industry, medical technology, industrial production, etc.
Y-axis
consisting of: drylin® ZLW-1080 toothed belt axis, standard version, toothed belt tension 200N, feed 70mm/revolution, aluminium profile, surface: hard-anodised, PU toothed belt with steel tension, white, guide carriage in length 150mm, shaft end supports made of aluminium, driven by an igus stepper motor in installation size NEMA24 in the version with M12 connectors and encoder
Z-axis
consisting of: drylin® GRR-1280 cantilever axis, AWMR hollow shafts, feed: 72.26mm/revolution, aluminium shafts, guide carriage in length 100mm, incl. adjustable housing bearings, shaft end supports made of aluminium, driven by an igus stepper motor in installation size NEMA23 with encoder
Control system
The igus Robot Control software enables simple and intuitive robot control system and programming and thus an easy entry into automation. The modular design allows different igus kinematics, for example delta robot, to be controlled. The linear robot can be controlled directly with all its advantages by our igus® Robot Control.
The free and licence-free igus robot control software is integrated into the control system and therefore uses a uniform operating concept and consistent communication services for many components of a system. This means less project planning and faster commissioning.
The igus robot control is not part of the product and can be purchased from us as an option. A master control system is not necessary.
If you want to use your own (robot) control system, this is also no problem.
Alternatively, there is also the possibility to operate each axis individually with a control system. For example with our igus® D1 dryve motor control system. With this control system architecture, you need one motor control system and an additional master control system per linear axis and motor, which controls the coordination of the movement. You then also have to program the inverse kinematics for the delta robot yourself in your development environment.
The motor control systems are not part of the product and can be purchased from us as an option. A master control system is currently not offered by igus.
Optional accessories
Cable set for 2-axis kinematics in 3, 5 or 10m, igus® Robot Control for linear robots or Further sizes available upon request.
Further information
The maximum payload is up to 10kg. The motor of the Z-axis is heavily loaded here and the wear increases. If you are unsure whether you can use the product as desired, please contact us. For a technical design, we can provide you with different installation sizes with strokes of up to 6m and 20kg load capacity. Please contact us for this or use our linear robot configurator (Beta).
More information: Category: Linear robot - wiki