iglidur® W360, sleeve bearing, mm - W360SM

iglidur® W360 | Endurance runner with all-round profile
The iglidur® material W360 combines excellent endurance properties with high temperature resistance, reduced moisture absorption and good price/performance ratio - a genuine all-rounder in the endurance sector.

Typical application areas

Vending machinery
Automotive
Motorbike / scooter

Here you will find further possible applications:
Industry solutions
 

When to use it? When an extremely wear-resistant plain bearing is required for medium loads When regular contact with moisture occurs When continuous operating temperatures are higher than +90°C

When not to use it? If a highly wear-resistant bearing for the normal temperature range and low to medium loads is required iglidur® J, sleeve bearing, mm When maximum temperature resistance and high wear resistance are required iglidur® Z, sleeve bearing, mm iglidur® J350, sleeve bearing, mm iglidur® V400, sleeve bearing, mm When maximum wear resistance is required in an underwater application iglidur® UW, sleeve bearing, mm iglidur® H370, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining