Name: igubal® fixing collars made of plastic, split, for the food industry (SRM-S25-V-KS-GT-FC)
Brand: igubal
SKU: SRM-S25-V-KS-GT-FC
Availability: InStock

igubal® self-aligning bearings

Accessories

igubal® fixing collars made of plastic, split, for the food industry

Order your free sample box with product samples and further information about our food-safe products now!

Video tutorials on the D1 motor control system

Would you like a ready-to-connect, harnessed energy chain, with cables as an option, or are you unsure whether the energy chain selected here is suitable for your application? Let our e-chain expert select and calculate the right energy chain based on your application data.

Quickly find the perfect conveyor roller for your application: simply enter your requirements and receive suitable conveyor rollers with a calculation of the expected deflection&nbsp;.

Find the right coupling joint for
your application: just enter your requirements and receive suitable suggestions
.

Calculate the current copper surcharge for your price calculation here.

Couldn't find the right shaft? Then simply configure your shaft the way you want it to be!

Video instructions for applications, commissioning and assistance with your motor control system

The right drylin E motor in just a few clicks. Simply enter your requirements and receive suitable suggestions.

Here, individual cables in lengths from 1,000m can be ordered at the current daily price within 3 minutes.

Quickly find the perfect ball bearing for your application: simply enter your requirements and receive suitable ball bearings with a service life statement.&nbsp;

Entering the parameters of travel, bend radius and acceleration will provide you with the service life of the chainflex® cable.

Quickly find and order harnessed drive cables in accordance with manufacturer standards.

Select and order a customised solution from over 950 cables and 3,500 plug-in connectors.

<h3 style="text-align:start;">Do you require customised lead screw machining?</h3>
Configure quickly & easily online here.

With the help of the inner separation configurator you can create a layout of the needed cables in the e-chain and get a feeling if there is enough space for every cable and where is the best position inside the e-chain.&nbsp;

In three steps, the igubal® expert asks you about your requirements for self-aligning igubal® bearings and provides you with a comprehensive suitability and service life analysis of all igubal® products.You can compare the results and order the most suitable igubal® bearing directly via the igus® online shop.&nbsp;

Product selection and service life calculation. By entering application parameters, you get the expected service life for iglidur® plain bearings.

Customised processing of machined end without CAD software, 2D drawing and 3D step file, generated online, immediate price calculation, order online right away or request a quote&nbsp;&nbsp;

Help with selecting the ideal lead screw drive for your application, service life calculation for desired lead screw drive configuration, PDF download with all details about required application.&nbsp;

Use the service life calculator to determine the expected service life of an energy chain.

Various cable types and lengths available as residual stock at attractive conditions.

With just a few clicks, you can put together a complete linear axis including motor, connection cables and built-on parts.

Can't find the right size? Simply configure here!

The iglidur® Bearing Designer enables you to display price breaks for plain bearings in your individual dimensions and preferred material in just a few steps. At the end you will receive a technical drawing of your individual plain bearing if desired and can order it right away or request further information from us.&nbsp;

Save time and money with free sample programs for your motor control system

Unsure if it fits? Simply configure online with our roller bearing configurator

Missing something? Then simply configure your desired solution yourself. Use our configurator!

Easily find the perfect solution for your applications: enter your requirements and receive the suitable configuration.&nbsp;&nbsp;

Enter application parameters and get suitable slewing rings and expected service life with just a few clicks.

iglidur® product finder for the right plain bearing&nbsp;

We have a wide range of manufacturing options available for the production of drawing parts. We will be happy to advise you regarding the most technically and economically efficient method and the perfect plastic material.&nbsp;

The product finder quickly provides you with an overview of all possible chainflex® cables specifically for your applications.

The Quickrobot is the easiest and fasted way to get with only a few clicks a complete dresspack for several robot manufacturers and types.&nbsp;

Test our motor control system online with the free browser application.

iglidur® A200 | FDA-compliant for low speeds
iglidur® A200 is suitable for use in direct contact with food. It is the ideal solution for bearing points on machines for the food industry, medical equipment manufacturing, small household appliances, etc. Since the addition of solid lubricants had to be dispensed with to ensure food compatibility, iglidur® A200 is specially designed for abrasion resistance. Additionally, the iglidur® A200 is characterised by its ability to embed dirt and by its quiet operation.

Typical applications

Food industry


When to use it?

Suitable for contact with food
When a low noise level is required
When dirt needs to become embedded
When FDA compliance is required

When not to use it?

When the maximum wear resistance is necessary
When temperatures greater than +80°C occur in the long term
When a cost-effective universal material is sought
For operations in wet environments



iglidur® AB | The first antibacterial iglidur® material
iglidur® AB helps to reduce the level of bacterial contamination in bearing points that are difficult to access. iglidur® AB was specifically developed for applications in areas with high hygiene requirements. Often such applications are manually operated pivots (doors, medical furniture, etc.). The material reduces the level of bacterial contamination but - like all &#34;anti-bacterial&#34; materials - is not a substitute for adequate hygienic measures.

Typical application areas

Medical technology
Laboratory technology
Ventilation systems
Sanitary furniture and equipment
Bearings of patient and care furniture


When to use it?

When bearing points must meet high hygienic standards
When a universal material for manual applications is required
When a material for low to medium loads is required

When not to use it?

When a highly wear-resistant material is required for continuous dry operation
When a material complies with the EU regulation 10/2011 EC and/or the FDA requirements for repeated food contact is sought
When a material with the highest universal media resistance is required



attributes_iglidur_eco_g_material_description

iglidur® GLW | Low-cost material for large volumes
With iglidur® GLW we can offer our customers an alternative to iglidur® G for large series applications. Featuring similar mechanical properties as iglidur® G, iglidur® GLW is primarily recommended for static loads. These applications, where the properties of iglidur® G are unimportant to a degree , iglidur® GLW presents a cost-effective alternative.

Typical applications

Automotive
Machine tools
Robotics


When to use it?

When an economical universal material for high volumes is required
For high, primarily static loads
For low to medium speeds

When not to use it?

When mechanical reworking of the wall surface is required
For primarily dynamic loads
When extreme wear resistance is required
For use under water




Food-safe according to FDA
Excellent abrasion resistance and very robust
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6
The iglidur i6 material was designed for laser sintering and was especially developed for manufacturing worm wheels for the food &amp; packaging industry. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM. This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6 is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food grade material is required
For applications with sliding motion, especially for worm gears
If a white base material is required for subsequent colouring

When not to use it?

When an optically detectable material in blue colour is required (→ iglidur i6-BLUE)
For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely free of lubrication; in wet applications, the surrounding media acts as additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction when used with hardened shafts.

Typical applications

Beverage industry
Medical technology
Offshore
Shipbuilding


When to use it?

﻿For underwater applications
When high temperature resistance is required
For high mechanical loading
For applications in contact with chemicals

When not to use it?

When extremely high wear resistance under water is required
When the best universal resistance to chemicals is required
For maximum compressive strength at higher temperatures



iglidur® H2 | Low cost, for high temperaturesWhen using iglidur® H2, economic aspects are in the focus. It is the first time that it is possible to offer such a high-performance material for high volume applications with these technical advantages at such a cost-effective price: temperatures up to +200°C, permitted surface pressure up to 110N/mm², and excellent chemical resistance. The iglidur® H2 material is self-lubricating and suitable for all motions.Typical applications

Automotive 


When to use it?

For use under water
When a cost-effective material is required for use at high temperatures
For applications with fuels, oils, etc.
Resistant to chemicals


When not to use it?

When extreme wear resistance is required
When vibration dampening is required
When neither increased temperatures nor media contact occur 



attributes_iglidur_l100_material_description

iglidur® UW500 | For hot liquids and fast, continuous movements
iglidur® UW500 was developed for underwater applications, where higher temperatures up to +250°C occur. The material can also operate in chemicals with media lubrication.
Typical applications

Automotive
Glass industry
Food industry
Machine tools
Heavy machinery/Plant construction


When to use it?

When the material needs to be used in liquids
For high speeds
For high temperatures
When a high chemical resistance is required


When not to use it?

When a low-cost underwater material for the normal temperature range is required
When looking for a low cost underwater material for infrequent operations
When a cost-effective universal material is sought 



iglidur® H4 | The automotive standard for temperatures up to +200°C
iglidur® H4 stands for high load capacity, good abrasion resistance and good temperature resistance, when economic aspects are also to be considered. Temperatures up to +200°C, permitted surface pressure up to 65MPa, and excellent chemical resistance are only some of the essential attributes. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to iglidur® H2 , which are also very cost-effective.

Typical applications

Vending machinery
Automotive
Packaging industry


When to use it?

For application with fuels, oils, etc.
When high wear resistance is required
For ﻿low coefficient of friction
For high temperature resistance from -40°C to +200°C
For high chemical resistance

When not to use it?

For underwater use
When a cost-effective universal material is sought
When a temperature and media-resistant material for static applications is required



iglidur® J200 | Specifically for aluminium shafts
iglidur® J200 is the result of the development of particularly low-friction materials. When using it in linear motion, friction can be critical. Many materials can give low coefficients of friction under high loads, but this material can give excellent coefficients of friction even at low loads.

Typical applications

Vending machinery


When to use it?

For applications with anodised shafts
When lowest coefficient of friction is required
When long service life at low loads is required

When not to use it?

When steel shafts are provided
When continuous operating temperatures are higher than +90°C
When a cost-effective universal material is sought



 iglidur® J260 | Ideal for plastic shafts 
The material iglidur® J260 proves itself again and again where the highest service life and coefficients of friction are required - especially in connection with plastic shafts! iglidur® J260 is similar to iglidur® J, an endurance runner with excellent wear properies, whereby the upper long-term application temperature of +120°C offers more reserves. 
  
Typical applications  

Vending machinery 
Machine tools 
Robotics 

  
When to use it? 

When polymer shafts are used 
When the temperature rating of iglidur® J is notsufficient 
When a material with low coefficient of friction isrequired 
When high wear resistance is required at medium loads 
When good liquid media resistance is required 

When not to use it? 

When high surface pressures occur
When continuous operating temperatures are higher than+120°C
When universal wear resistance is required 



iglidur® H1 | Endurance runner with high media resistance
iglidur® H1 is the first choice when long service life is required under extreme ambient conditions. Extreme wear resistance is coupled with excellent resistance to temperature and media - not only in the packaging and food industries or the automotive industry.

Typical applications

Vending machinery
Beverage industry
Textile industry
Packaging industry


When to use it?

When maximum service life is required, influenced by temperature and humidity
When low coefficient of friction at high temperature is important
When normal aggressive cleaning is required (splashes, steam blasting)
For under bonnet applications

When not to use it?

When high surface pressures occur
When the best universal chemical resistance is required
When a cost-effective high-temperature material opposed to wear resistance is required
When an FDA-compliant material with high temperature resistance is required



Die Werkstoffe der ECON-Serie, iglidur J4, GLW, P4, PLW210, ALW350, HLW und NEU: Q2LW sind nicht nur für viele Anwendungsbereiche bestens geeignet, sondern nun auch im europäischen Markt in Standardabmessungen verfügbar.  
Vorteile: 

Universell einsetzbar
Varianten für hohe Temperaturen
Lebensmitteleinsatz und Verschleißfestigkeit verfügbar
Kostengünstig, besonders bei größeren Stückzahlen
Ca. 50 % reduzierter CO2-Fußabdruck  



iglidur® Q2 | The durable heavy-duty material
iglidur® Q2 stands for high load-bearing capacity and good abrasion resistance under high loads. The price-performance ratio is outstanding. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to other iglidur® materials, especially for highly loaded swivel applications.

Typical areas of application

Agricultural technology
Construction machinery
Mechanical engineering


When do I use it?

When high dynamic loads occur
If, in addition to high loads, shocks, impacts and dirt occur
For highly loaded swivel applications

When do I not use it?

If only static loads occur
When high pv values occur at high speeds
If an inexpensive all-rounder material is required
When soft shafts are used



iglidur® R | Low-cost material, low coefficients of friction
In the development of iglidur® R, the focus was on high performance and a very low price. In particular, low friction and wear values were to be achieved in dry running. Components made of iglidur® R are specifically supported by a combination of solid lubricants. The PTFE and silicone-free material achieves outstandingly low friction values in dry running and runs largely stick-slip-free.


Typical areas of application

Motorcycle/Rolloler
Furniture/industrial design
Sport, fitness &amp; rehab



When do I use it?

When high wear resistance at low loads is required
When a very inexpensive material is required
When very low coefficients of friction are required in dry running
When edge loads occur
When low moisture absorption is desired
When PTFE or silicone are not approved for the application

When should I not use it?

When high pressure loads occur
When temperatures are permanently higher than +90 °C
When the best possible wear resistance is required 



attributes_iglidur_i3000_3d_druck_material_description

attributes_iglidur_tx1_material_description

attributes_iglidur_uw_material_description

attributes_iglidur_uw160_material_description

iglidur® V400 | For soft shafts, up to +200°C
Highly wear-resistant material for soft shafts and temperatures up to +200°C with low moisture absorption and very good chemical resistance.
Typical applications

Ventind machinery
Automotive
Aviation
Heavy machinery/Plant construction


 When to use it?

When extreme wear resistance is required with soft shafts
When the highest wear resistance at temperatures above +100 °C is required
When vibrations and edge loads are present
When the material should be resistant to chemicals


When not to use it?

For hardened shafts
When room temperatures prevail
When a cost-effective universal material is sought 



With DIN EN 45545, the new iglidur RW250 material fulfills the strict fire protection requirements of railroad technology. In addition, the material formulation has been optimized for absolute wear resistance and offers very good running properties in many applications.  


iglidur® PEP - for all shaft surfaces and materials 
iglidur® PEP consists of a combination of two plastic layers. Even threads, rust or scratches do not impair the permanently reliable function. 



Versatile use: good combination of high wear resistance, strength and temperature resistance


Self-lubricating filament iglidur i180 
Components made from the 3D printing material iglidur i180 can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications


When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260)



iglidur® A350 | The endurance runner at higher temperatures in the food sector
iglidur® A350 is designed in such a way that it can be used for all loads in the food and packaging industry. Even high loads, as seen in lifting equipment or presses, are easy and the material works without any external lubrication.

Typical applications

Food industry
Beverage industry
Medical technology


When to use it?

When FDA compliance is required
When wear resistance and FDA are required for high loads
When the material is used in acid environments

When not to use it?

When temperatures are continuously higher than +180°C
When the maximum wear resistance is necessary
When a cost-effective FDA-compliant material is required
For high speeds




Flame-retardant, according to UL94-V0 and DIN EN 45545
Temperature-resistant up to + 170 °C
Flexural strength 91 MPa


Fire-retardant high-temperature filament, ideal for the railway industry
iglidur RW370 is an abrasion-resistant, high-temperature tribofilament which was specifically developed for use in railway vehicles. As such, its fire-retardant specifications conform to UL94-V0 and EN45545. In addition, it has the maximum mechanical strength of all tribofilaments and a long-term temperature resistance of 170 °C, which makes it the material of choice for high-temperature applications.

When to use it?

When the application requires high temperature resistance
When the mechanical strength of the other tribofilaments is not sufficient
When fire-retardant specifications are required

When not to use it?

When very high wear resistance at high-temperature load is required (→ iglidur A350)



iglidur® HSD350 | Media-resistant and hygienic at low costs
The new material enables continuous use where hygiene is important, including regular sterilisation, with an outstanding price/performance ratio.

Typical application areas

Fluid technology
Medical technology


When to use it?

When the bearing point is regularly sterilised using hot steam
When a low-cost material is needed at the same time
When good chemical resistance is required
Low moisture absorption

When not to use it?

When high pressure loads occur
When short-term temperatures higher than +120°C occur
When a cost-effective material for occasional movements is necessary



iglidur® J4 | Lowcost material
iglidur® J4 is the low-cost material for long service life at low to medium loads.

Typical application areas

3D printers


When do I use it?

When I am looking for a lubricant-free and maintenance-free material
When I am looking for a low-cost material for large series
When I need low coefficients of friction
If I need good media resistance If I need low moisture absorption

When do I not use it?

For high loads When I have high temperatures in my application



iglidur® W300 | The endurance classic, very wear-resistant on (almost) all shafts
iglidur® W300 offers high wear resistance, even in rough shafts or very abrasive ambient media. This material is the most tolerant of these external effects out of all the iglidur® range.

Typical applications

Vending machinery
Printing industry
Wood industry
Machine tools


 When to use it?

When especially high service life is necessary
When low coefficient of dynamic friction and high wear resistance are required
For use on 304 stainless steel shafts
For harsh environments and rough shafts
Dirt-resistant


When not to use it?

For high loads from 50 MPa
When temperatures continuously greater than +90 °C are present
For very wet environments
When an exceptionally economical material is desired 



iglidur® X6 | Service life up to six times longer than iglidur® X
Thanks to nano technology, iglidur® X6 has a service life up to six times longer than the high-performance material iglidur® X in many swivel and rotation applications - even beyond +100 °C.

Typical application areas

Fluid technology
Glass industry
Food industry
Mechanical engineering
Textile industry 


When do I use it?

When temperatures greater than +150 °C occur
If the wear resistance of iglidur® X is not sufficient during swiveling and rotation
If the press fit is to be improved compared to iglidur® X
If the highest media resistance is required
When freedom from PTFE is required

When do I not use it?

When a cost-effective universal bearing is sought
When a bearing for underwater use is sought
If you are looking for a wear-resistant high-temperature bearing for linear strokes 




Versatile use: good combination of high wear resistance, strength and temperature resistance
Colour: black

Self-lubricating filament iglidur i180  in black colour
Components made from the 3D printing material iglidur i180-BL can be used universally for all types of wear-resistant parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications
If a black material is required

When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260) 



Bearings of so-called tracking systems in photovoltaic systems defy particularly adverse environmental conditions. iglidur P UV was developed for this area of application. The special composition ensures high resistance to ultraviolet rays and ensures that components made of iglidur P UV function for a particularly long time and with the least possible loss of strength. 



Food compliant according to FDA
Blue colour for optical detectability
Excellent abrasion resistance and toughness
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6-BLUE
The iglidur i6-BLUE material, developed for laser sintering, is specifically intended for use as a worm wheel, and for food contact. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM - This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6-BLUE is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food-compliant material in a continuous blue colour is required (optical detectability)
For applications with sliding motion, especially for worm gears

When not to use it?

For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)




Extremely robust and rigid with carbon fibre reinforcement
Suitable for structural components and multi-material components
Flexural strength up to 237 MPa, flexural modulus of elasticity of up to 11.5 GPa, improved strength in z-direction


High-strength filament for structural components or as a material partner for multi-material components
igumid P190 is an extremely strong and stiff 3D printed filament due to the reinforcement with carbon fibre. It was specially developed as a partner material for iglidur i190 for the production of very strong and at the same time friction-optimised components in multi-material printing. Furthermore, it can be used for printing stable structural components. Thanks to the high strength and high rigidity, as well as its low density of 1.25g/cm³, igumid P190 is ideal for lightweight construction with low material requirements.

When to use it?

For structural components where high strength and stiffness are required
For special mounting brackets for energy chains
As a multi-material partner with iglidur i190, for the combination of a high-strength material (igumid P190) and a particularly durable plastic (iglidur i190)

When not to use it?
For friction and wear applications (→ iglidur i150 or iglidur i180 or iglidur i190)
If the application requires a food-grade material (→ iglidur i150 or iglidur i151 or iglidur A350)
If the application temperature is higher than 120 °C in the long term (→ iglidur A350 or iglidur RW370)



attributes_iglidur_q2e_material_description


Higher application temperature up to 110 °C
Highest flexural strength of 94 MPa at 20 °C
PFAS-free
Electrostatic dissipative (ESD)


Selective laser sintering (SLS) material: iglidur i230
The iglidur i230 laser sintering powder stands out as another all-rounder material among the iglidur SLS materials. Unlike iglidur i3, however, it is designed for higher application temperatures and withstands long-term temperatures of up to 110 °C. Moreover, the material is 80 % more wear-resistant than PA12. Of all iglidur SLS materials, iglidur i230 offers the highest flexural strength and, in addtion, it has electrostatically dissipative (ESD) properties.
Good to know: iglidur i230 contains no PTFE and is therefore not affected by future PFAS regulations.

When to use it?

When a PFAS-free material is required
If the application temperature is above 80 °C in the long term and at a maximum of 110 °C
If components with high mechanical strength (also structural components) are required
If components with ESD properties are required up to 110 °C application temperature

When not to use it?

If components with higher wear resistance at max. 80 °C application temperature are required (→ iglidur i3)
If components with ESD properties up to 80 °C application temperature are required (→ iglidur i8-ESD or iglidur i9-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food-safe material (→ iglidur i6)
When components with higher elasticity are required (→ iglidur i10)
If the application temperature is higher than 110 °C in the long term (→ iglidur A350 or iglidur RW370)




Flexural strength up to 80 MPa, best iglidur filament
Excellent service life - 50 times higher abrasion resistance than ABS


Flexible and wear-resistant filament - iglidur i190
iglidur i190 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed on regular 3D printers, but a closed 3D printer is recommended. Due to its high wear resistance and excellent mechanical specifications (strength, toughness, coating adhesion), it is an all-round material that is suitable for most applications and 3D printers. Of all igus tribofilaments, only iglidur RW370 has a higher strength than iglidur i190. It can also withstand a long-term application temperature of up to 90 °C (after tempering the component).

When to use it?

For all types of applications where low friction and high wear resistance are important
When higher strengths are required

When not to use it?

If the application temperature is higher than 90 °C in the long term (→ iglidur J260 or iglidur RW370)
For applications under water or with high humidity (→ iglidur i180)
If the application requires a food grade material (→ iglidur i150 or iglidur A350)



igubal® fixing collars made of plastic, split, for the food industry

Productdescription

Technical data

Online tools

Downloads

igubal® fixing collars made of plastic, split, for the food industry

Product­description

Technical data

Online tools

Downloads

Productdescription